Cách cài đặt wifi Tenda 2 râu

Thisdocument applies for the users that want to setup universal repeaterfunction

Model Number: N301/F3/FH456Question Classification: Function Settings

Part 1:Configure IPaddress of your computer

Part 2:Login to the setuppage

Part 3:Setup UniversalRepeater function

Part 4: Checkwhether you can surf the internet

1. Click onNetworkConnection Iconon the system bar, then click onOpen Networkand Sharing Center.

2. ClickonChange Adapter Settings.

3.RightclickonLocal Area Connection, then choose thePropertiesoption.

4.DoubleclickonInternet Protocol Version 4(TCP/IPv4).

5.ChooseObtain an IP address automaticallyandObtainDNS server address automaticallyand then clickOK.

6.Alsoclick onOKon the firstLocal Connection Propertieswindow.

Notice:If you use therouter for the first time, it will appear easy to use interface in the processof you set Universal Repeater mode, you need to skip these interface, go to theadvanced Settings interface to set.

1.Open a browser thentype 192.168.0.1 in the Address Bar, press Enter,and login tothe router interface.

Cách cài đặt wifi Tenda 2 râu

2.Clickthe "Skip" or Next.

Cách cài đặt wifi Tenda 2 râu

3. Setrouters SSID and wireless password, and click Next, refer to the followingsteps.

Cách cài đặt wifi Tenda 2 râu

4.Savingplease wait Wait about 10 seconds, it will come out aninterface. Click More to go to advanced setting page.

Cách cài đặt wifi Tenda 2 râu

Cách cài đặt wifi Tenda 2 râu

1.Enter the router's setting interface,click WirelessRepeating. choose bridge mode as Universal Repeater, selectyour uplink wifi signal, type wifi password of your uplink router, click OKto save all the settings. Then click OK on the pop-up window.

Cách cài đặt wifi Tenda 2 râu

2. After click OK, the routerwill reboot automatically.

Cách cài đặt wifi Tenda 2 râu

Notice:For the convenienceof management, when you setup Universal Repeater mode, we have to make surethis routers IP address is different from uplink routers address, but in thesame network segment. Such as if the uplink routers IP address is 192.168.2.1,we have to change this routers IP address to 192.168.2.X, X(2~254).

Afterreboot, connect routers LAN1/LAN2/LAN3 ports, or reconnect wireless signal ofthe router, try whether you can surf the internet.