The DENALI D4 2.0 TriOptic™ LED light kit with DataDim technology is among the most powerful auxiliary lights on the market, thanks to a stingingly strong quartet of LEDs that help you identify trouble as far as 800ft down the road yet still shines brightly to the edges of the road and beyond. Four 10-watt CREE XPL HI LEDs produce a piercing beam of light yet combine to use just 6.6 amps for both lamps.
New with the DENALI 2.0 generation of lighting is the industry-leading TriOptic™ lens system. Right out of the box, the D4 is fitted with True-Hybrid™ lenses, providing a combination of spot and flood patterns in each lamp. This configuration gives you 560ft of forward light and 140ft of visibility to the side. Also in the box are replacement lenses that convert all four LEDs in each lamp to the spot pattern, resulting in a tight, distance-focused beam good out to 800ft while still retaining a 110ft beam width. Fit one of each lens to your D4 pair to get a Spot-Hybrid beam good for 625ft of maximum distance with a 140ft beam width. The spot lenses are E-Marked to be road legal in countries where this is a requirement.
Those night-defying LEDs are housed in square aluminum pods only 3.9in square and 2.6in. deep and utilize built in cooling fins to effectively dissipate heat and maximize light output. A durable black powder coated finish and a special Impact PC™ corrosion proof bezel ensures your lights will continue to look great even after repeated stone and debris impacts. Because of their size, the D4 lights are recommended for use with sturdy crash bars or other engine-protection devices, or with DENALI’s growing line of bike-specific mounts.
The D4 2.0 kit uses a just-developed HotSwap™ modular wiring harness that, by default, causes these single intensity lights to function at full brightness. But if you would like them to operate at both half and full power, simply add the dual intensity DataDim™ module. No other changes are required except to replace the original relay with the DataDim™ module and connect one wire to the high-beam circuit.
DENALI’s quad-LED D4 has provide its worth to sport-touring and adventure riders the world over. Now, the next-generation DENALI 2.0 D4 is here to take illumination to an entirely new level.
Simply put; the DENALI D4 is a beast. It is DENALI’s most powerful light packing the punch of 8750 lumens in a pair of aggressively styled housings. The installed hybrid lens is equipped with two elliptical flood lenses and two spot beam lenses to create the ultimate hybrid beam pattern; a super wide close-range flood and a piercing spot beam in one housing. The included pair of spot lenses throws a massive beam of light 800 feet and carries an official E-Mark certification.
Our TriOptic™ Lens System means that each light pod has a factory-installed clear spot lens but also includes an optional flood lens to enable three different beam options when used as a pair [Spot, Flood, or Hybrid].
Choose to add an additional set of amber or selective yellow lenses to achieve greater performance in adverse weather conditions or to make your vehicle significantly more visible to other motorists on the road!
More Flexibility, Maximum Control
For 2022 we have expanded on our standard light kit to deliver a customizable package that allows you to choose the best harness and lighting control option for your vehicle on your budget! Select from the options above or click on the links below to learn more about each of our wiring and switching options. Please be sure to add one of these options to your light pods to complete your DENALI lighting kit!
- Standard Powersports Harness - Robust, inexpensive, low-profile waterproof switch - the best option for a basic single intensity install
- Standard Automotive Harness - Robust, added length, and a flush mount illuminated rocker switch for dash mounting
- Premium Powersports Harness - Overmolded wire, and a premium illuminated switch with handlebar mounting kit
- DataDim Module - Add this clever dimmer module to any of the above harnesses to enable your lights to change intensity in sync with your factory high beam switch!
- DialDim Lighting Controller - The top dog in LED lighting control allows you to independently turn on/off and dim two sets of lights from a single halo dimmer switch and unlocks heaps of bonus features like high/low sync, strobe with horn, flash with signal, cancel with signal, electronic fuse setting and even doubles as a battery voltage monitor!
And last but not least we also make a complete accessory manager [The CANsmart Controller] that has dozens of customizable settings for controlling LED lights but can also be used to power and control any electrical accessories from lights and horns to heated grips, dash cams and GPS units.
D4 Light Pod Features
- High-Intensity Series Cree LEDs outputting 8760 lumens per pair
- TriOptic™ Multi-Beam Lens System includes a Spot, Flood and Hybrid beam option in one pair of pods
- DataDim™ equipped light pods enable plug and play connection, and integrated dimming, with DENALI dimming and lighting controllers.
- DrySeal™ Submersible Waterproof light housings can withstand the most extreme environments
- Impact PC™ Polycarbonate bezels won't crack, fade or corrode like traditional aluminum bezels
- LiveActive™ Thermal Management keeps the LEDs cool preventing the loss of light output from overheating
- Low profile mounting bracket with stainless steel hardware included
- Additional pair of E-Mark Approved spot lenses included
- Interchangeable lenses available in Clear, Amber, and Selective Yellow
D4 Pod Specs [pair]
- LED’s: [8x] 10 Watt Cree XPL HI
- Power Draw: 6.6 Amps
- Beam Distance [Spot]: 800 Feet
- Beam Width [Spot]: 110 Feet
- Raw Lumens: 8760
- Intensity: Single Intensity Harness
- DataDim™ Compatible: Yes
- Operating Voltage: 12 VDC
- Pod Size: 3.9” Square x 2.6” Deep [each]
- Pod Weight: 1.55 lbs [each]
- IP67 Waterproof & Submersible
- E Mark Approved Spot Lenses
D4 Product Bundles - What’s Included?
The default product options above labeled [pair] include [2x] light pods with clear lenses installed [and an additional set of amber or yellow lenses if selected].
You can then choose to add one of our four wiring harness options.
All products included in this bundle are packaged in separate retail boxes and may ship separately. See below for the specific box contents of each light pod and lens kit.
What is the difference between Denali S4 and D4?
To be notified when this product is back in stock please click here. The DENALI S4 quad LED Lights are designed as a more general-use version of the professional D4 High Power quad LED lights. The S4 lights are smaller and lighter than the D4 pods and so can be installed in less-secure locations such as the mudguards.
What size is the Denali d2?
Raw Lumens: 1095. DataDim™ Compatible: Yes. Operating Voltage: 12 VDC. Pod Size: 2.2” Round x 2.4” Deep.
What size is the Denali DM?
Fitted into rugged aluminum housings only 1.7in in diameter and 2.4in long are powerful 10-watt Cree LEDs, providing 395ft of useful, confidence inspiring light. The DM's compact shape allows it to be fitted anywhere your imagination takes it, although it's really optimized for fender mounting.