What is the next action after replacing motherboard on a Windows 10 system Quizlet
|
Use the "bootsect" command to make the USB flash drive bootable Use a USB flash drive with at least 4 GB of storage space Copy the product DVD to a USB flash drive and boot from the drive You have been asked to install Windows 10 on several computers that do not have optical drives. What should you do? (Select three. Each choice is part of the entire solution) On the screen where you select the disk to install Windows, click "Load Driver" You are installing Windows on a new computer. Using RAID controller on the motherboard, you configure three hard disks in a RAID 5 array. You leave the array unpartitioned and unformatted. You edit the BIOS boot order to boot from the optical drive. You insert installation DVD, boot to the disc, and start the installation. When you are prompted to select the disk where you want to install Windows, the RAID array you created does not show as a possible destination disk. What should you do? In the BIOS, modify the boot order to boot from the USB device first You are preparing to install Windows on a new computer. You copy the installation files from a DVD to a USB flash drive and then use "bootsect" to make the USB drive bootable. Using the RAID controller on the motherboard, you configure three hard disks in a RAID 5 array. Using the disk tools, you create a single partition that takes up the entire array. You insert the USB drive and boot the computer. The computer boots and displays the following message: "Error loading operating system. Reboot and select proper boot device" What should you do? Gather application installation media and product keys Create a system image Back up the user data You have a computer that currently has Windows 7 installed. You need to perform a clean installation of Windows 10, but it is very important that you are able to continue using this system with the same applications and data. You must retain the existing data files from the Windows 7 installation and be able to continue using the same applications after the Windows 10 clean install is complete. What should you do? (Select three) DiskPart Windows 7 USB/DVD Download Tool Media Creation Tool You want to prepare a USB flash drive that you can use as a Windows 10 installation source Which of the following tools can you use to prepare the USB flash drive (Select three) Run "bcdedit.exe" You have a stand-alone, dual-boot system running both Windows 7 and Windows 10. The computer currently boots to Windows 7 by default. You need the computer to boot to Windows 10 by default instead. What should you do? Click Custom:Install Windows Only (Advance) You are performing an installation of Windows 10 on a desktop PC that uses a newly configured RAID 1 disk array. You booted the system from the Windows 10 installation DVD and navigated through the first few screens of the installation wizard. You've reached the screen shown in the exhibit. Which action should you take? The systems hardware ID (HWID) has changed The activation status of Windows has not changed The hardware in a user's Windows 10 Professional system is configured as follows: You recently made the following changes to the system hardware: Which of the following are true concerning the activation status of the copy of Windows 10 installed on this system? (Select two) The activation status of Windows has not changed The system's hardware ID (HWID) has changed The network board quit working recently, so you made the following changes to the system hardware: Which of the following are true concerning the activation status of the copy of Windows 10 installed on this system? (Select two) The system's hardware ID (HWID) has changed Windows must be reactivated Recently, several capacitors on the system motherboard began leaking, so you replaced it with a newer motherboard with a faster CPU. Th system still uses the original hard disk and optical drive. Which of the following are true concerning the activation status of the copy of Windows 10 installed on this system? (Select two) The Windows client systems will attempt to renew their activation status every seven days KMS activation are valid for 180 days You have configured a Windows server in your network to provide activation for your Windows workstations using the Key Management Service (KMS). Which of the following are true concerning activation in this network? (Select two) The Windows client systems and the Windows server must all be members of the same domain The Windows client systems will remain activated as long as they remain members of the domain You have configured a Windows server in your network to provide activation for your Windows workstations through Active Directory. Which of the following are true concerning activation in this network? (Select two) Activates Windows- /ato Displays summary license information- /dli Displays detailed license information- /dlv Displays a license's expiration date- /xpr Installs a new product key- /ipk Match each description with the corresponding "slmgr" command option Run the Windows 10 Upgrade Assistant You have a Windows 7 system that you would like to upgrade to Windows 10 How can you make sure that everything in your current system is compatible with Windows 10? Create a system image Gather installation discs and product keys for applications you want to keep You have a WIndows 7 Enterprise system that you are upgrading to Windows 10 Enterprise. You've already purchased and downloaded the installation ISO file and burned it to a DVD Next, you ran the Windows 10 Upgrade Assistant. It alerted you to the fact that you needed to install the latest update to Windows 7 before proceeding with the upgrade. Everything else on your system meets the Windows 10 requirements. After installing the latest Windows 7 update, which of the following are recommended steps you should perform to prepare for the upgrade? (Select all that apply) Customize setting You are running the Windows 10 upgrade process and have reached the point in the process shown below. You are very concerned about keeping your personal data private. Which option should you click? This is the original version of Windows 10, and it has not been receiving updates You have been running Windows 10 on your system for six months. You need to know which version of Windows 10 it is running, so you open a command prompt and enter the "winver" command. The About Windows dialog contains the information shown below. What does this information tell you? There is no entry for a Windows 10 Version number There is no entry for an OS Build number You are helping a user who has been running Windows 10 for over a year. You notice that some features don't look the same as they do on your Windows 10 system. For example, the title bars on windows are plain white, and the Start menu is not as polished. You wonder if this user's computer has received the latest update. The user is sure that updates have been happening, but you're not sure, so you open the Settings app and click System. On the About tab, you see the information below. How do you know this computer has not been receiving updates? (Select two) Run the Windows 10 Anytime Upgrade You have a workstation running Windows 10 Home that you would like to upgrade to the Windows 10 Pro edition. How can you perform this upgrade with the least amount of effort and cost while maintaining applications, drivers, and user profile data? Yes. This system meets the system requirements for upgrading to Windows 10 Pro You have a 64-bit computer that runs Windows 7 Professional. You would like to upgrade the computer to Windows 10 Pro. Your computer has the following specifications: You ran an update, so you have the latest version of Windows 7 Professional. Next, you will run the Windows 10 Upgrade Assistant Can you expect your system to meet the system requirements for the upgrade to Windows 10 Pro? Windows 7 Home Premium cannot be upgraded to Windows 10 Enterprise You need to upgrade a notebook system running 64-bit Windows 7 Home Premium edition to 64-bit Windows 10 Enterprise. Which of the following is true regarding this upgrade path? 1.
Boot the new computer using WinPE You have a single computer without an operating system installed. This system will be used by an employee who works with sensitive information, so the operating system partition must be encrypted. You have an image of a Windows installation stored on a network share What must you do to manually deploy the image to an encrypted partition on the computer? Run Diskpart to partition and format the disk You have an image of a Windows installation that is stored on the following network share: \\imgserv\images You need to manually deploy the image onto a computer that has no operating system installed. You have booted the computer using WinPE and mapped a drive to the network share. What should you do next? Use "image.exe" with the /apply option to copy the image from the network share to the local drive Use the "net use" command to connect to the network share and map the drive with a letter You have an image of a Windows installation that is stored on the following network share: \\imgserv\images You need to manually deploy the image onto a computer that has no operating system installed. You have booted the computer into WinPE and partitioned and formatted the local hard drive with DiskPart. What should you do next? (Select two. Each answer is part of the complete solution) Install the latest hardware drivers for these new desktop computers on the WinPE image You have previously deployed Windows to all of the desktop computers in your company using a single system image. To install this image, you created a WinPE boot CD One of the employees you support is not able to install the image on a new desktop computer using the WinPE CD because it cannot boot to the network drive How can you resolve this issue? Uses the /apply switch to deploy images in WinPE- ImageX Command-line tool used to configure a partition so that i can be use to start the computer- BCDboot Boots the system with a limited version of Windows, which provides disk access and limited networking support- WinPE Used to partition and format the hard drive prior to installing the image- DiskPart Uses the /apply-image switch to deploy images in WinPE- DISM Match the tool to its description |
