What component is used to prevent the motherboard from touching the bottom of the case?

Most motherboards are attached to their case or sone other metal plate using standoff screws . Similar to the ones below.

The standoffs prevent the electrical components on the bottom of the motherboard from touching the metal of the case. If the metal contacts on the underside of the motherboard touched the case while it was powered on, bit could result in the computer not working at best, or destroy it at worst. A higher voltage rail could pass through a lower voltage circuit and burn out the components.

As far as I know, there is no minimum height. You want enough distance to keep the board from flexing into the case if it wasn't properly supported and heavy components are I stalled on it. Additionally, you do t want it so low an electrical arc could jump from the board to the case.

What component is used to prevent the motherboard from touching the bottom of the case?

Lesson 5: Inside a Computer

/en/computerbasics/buttons-and-ports-on-a-computer/content/

Inside a computer

Have you ever looked inside a computer case, or seen pictures of the inside of one? The small parts may look complicated, but the inside of a computer case isn't really all that mysterious. This lesson will help you master some of the basic terminology and understand a bit more about what goes on inside a computer.

Watch the video below to learn about what's inside a desktop computer.

Looking for the old version of this video? You can still see it here: 

Motherboard

What component is used to prevent the motherboard from touching the bottom of the case?

The motherboard is the computer's main circuit board. It's a thin plate that holds the CPU, memory, connectors for the hard drive and optical drives, expansion cards to control the video and audio, and connections to your computer's ports (such as USB ports). The motherboard connects directly or indirectly to every part of the computer.

CPU/processor

What component is used to prevent the motherboard from touching the bottom of the case?

The central processing unit (CPU), also called a processor, is located inside the computer case on the motherboard. It is sometimes called the brain of the computer, and its job is to carry out commands. Whenever you press a key, click the mouse, or start an application, you're sending instructions to the CPU.

The CPU is usually a two-inch ceramic square with a silicon chip located inside. The chip is usually about the size of a thumbnail. The CPU fits into the motherboard's CPU socket, which is covered by the heat sink, an object that absorbs heat from the CPU.

A processor's speed is measured in megahertz (MHz), or millions of instructions per second; and gigahertz (GHz), or billions of instructions per second. A faster processor can execute instructions more quickly. However, the actual speed of the computer depends on the speed of many different components—not just the processor.

RAM (random access memory)

What component is used to prevent the motherboard from touching the bottom of the case?

RAM is your system's short-term memory. Whenever your computer performs calculations, it temporarily stores the data in the RAM until it is needed.

This short-term memory disappears when the computer is turned off. If you're working on a document, spreadsheet, or other type of file, you'll need to save it to avoid losing it. When you save a file, the data is written to the hard drive, which acts as long-term storage.

RAM is measured in megabytes (MB) or gigabytes (GB). The more RAM you have, the more things your computer can do at the same time. If you don't have enough RAM, you may notice that your computer is sluggish when you have several programs open. Because of this, many people add extra RAM to their computers to improve performance.

Hard drive

What component is used to prevent the motherboard from touching the bottom of the case?

The hard drive is where your software, documents, and other files are stored. The hard drive is long-term storage, which means the data is still saved even if you turn the computer off or unplug it.

When you run a program or open a file, the computer copies some of the data from the hard drive onto the RAM. When you save a file, the data is copied back to the hard drive. The faster the hard drive, the faster your computer can start up and load programs.

Power supply unit

What component is used to prevent the motherboard from touching the bottom of the case?

The power supply unit in a computer converts the power from the wall outlet to the type of power needed by the computer. It sends power through cables to the motherboard and other components.

If you decide to open the computer case and take a look, make sure to unplug the computer first. Before touching the inside of the computer, you should touch a grounded metal object—or a metal part of the computer casing—to discharge any static buildup. Static electricity can be transmitted through the computer circuits, which can seriously damage your machine.

Expansion cards

Most computers have expansion slots on the motherboard that allow you to add various types of expansion cards. These are sometimes called PCI (peripheral component interconnect) cards. You may never need to add any PCI cards because most motherboards have built-in video, sound, network, and other capabilities.

However, if you want to boost the performance of your computer or update the capabilities of an older computer, you can always add one or more cards. Below are some of the most common types of expansion cards.

Video card

What component is used to prevent the motherboard from touching the bottom of the case?

The video card is responsible for what you see on the monitor. Most computers have a GPU (graphics processing unit) built into the motherboard instead of having a separate video card. If you like playing graphics-intensive games, you can add a faster video card to one of the expansion slots to get better performance.

Sound card

The sound card—also called an audio card—is responsible for what you hear in the speakers or headphones. Most motherboards have integrated sound, but you can upgrade to a dedicated sound card for higher-quality sound.

Network card

What component is used to prevent the motherboard from touching the bottom of the case?

The network card allows your computer to communicate over a network and access the Internet. It can either connect with an Ethernet cable or through a wireless connection (often called Wi-Fi). Many motherboards have built-in network connections, and a network card can also be added to an expansion slot.

Bluetooth card (or adapter)

What component is used to prevent the motherboard from touching the bottom of the case?

Bluetooth is a technology for wireless communication over short distances. It's often used in computers to communicate with wireless keyboards, mice, and printers. It's commonly built into the motherboard or included in a wireless network card. For computers that don't have Bluetooth, you can purchase a USB adapter, often called a dongle.

/en/computerbasics/laptop-computers/content/

What prevents a motherboard from shorting onto a metal case?

Most motherboards are attached to their case or sone other metal plate using standoff screws . Similar to the ones below. The standoffs prevent the electrical components on the bottom of the motherboard from touching the metal of the case.

What is the case that protects the motherboard?

system unit ( or chassis ), refers to the case on a desktop that contains and protects the motherboard, hard drive, memory & other electronic components.

What does the technician use when installing a motherboard to prevent it from touching the metal portions of the computer case?

Standoffs are small brass spacers that match up with the screw holes on your motherboard, and work to keep the metal on the motherboard from touching the metal in your case.

What is used to keep the motherboard in place?

Motherboard standoffs have a specific type of screw that it supports, either a #6-32 UNC type screw or an M3 screw. Take a look at the parts index/package contents page in the manual of your case. You will most likely find an illustration of what type of screw you need and where to find it.