Windows cannot connect to the printer access is denied lỗi
Recently we wanted to print something from an old computer running Windows 2000 (yes, we have all kinds of dinosaurs in our office zoo) to a printer connected to a laptop that was recently upgraded to Windows 10. In the past, all we needed to do was to share the printer on the laptop, and then add it as a network printer on the Windows 2000 computer, and it would work beautifully. This time, however, when attempting to add the network printer to the Windows 2000 computer, we received the following message: "Windows cannot connect to the printer. Access is denied." We tried to do the usual troubleshooting: checked the security settings of the shared printer, checked the sharing settings, made sure that the file and printer sharing was enabled on the Windows 10 laptop, all was in order, yet the Windows 2000 computer was still denied access to the shared printer. After restarting both computers a few times and repeating the sharing/connecting steps, but the same error message appeared every time. So we tried something different, and it worked. We decided to share our solution here, hoping it could be of help to someone else:
If you don't know the network name of your computer, you can find it out as follows: right-click on the This PC folder (or Computer) in Explorer or some other file manager, and choose Properties from the shortcut menu. On that page, look for the 'computer name' text. That's the name you need to enter instead of 'laptop' in our example. Be sure to use the name of the computer that has the printer attached to it, not the one from which you are trying to connect to the printer through the network! Next, Windows will probably ask you to select the printer make and model, install its drivers, etc. Keep providing the information that the wizard requires, according to your specific printer. When done, Windows should add the new printer to the computer, and you should be able to use it to print files. The procedure described above worked for us, hopefully it will work for you, too. Happy printing! If you want to link to this article, you can use this HTML code: Solved: Windows cannot connect to the printer. Access is denied. Một máy in dùng chung cho nhiều PC là một điều rất phổ thông tại môi trường văn phòng. Tuy nhiên một lỗi rất phổ biến gây trở ngại cho quá trình in ấn đó là “Windows cannot connect to the printer” ( thường gặp nhiều nhất ở Windows 7). Trong bài viết sau, Phong Vũ muốn chia sẻ tới quý bạn đọc hướng dẫn 4 cách sửa lỗi không thể kết nối tới máy in trên. Lỗi “Windows cannot connect to the printer” nhiều khả năng đi kèm với các dòng mã cụ thể như 0x0000007e. Cách 1: Khởi động lại Printer Spooler Service
Tìm kiếm mục Print Spooler và nhấn đúp vào icon mục được chọn. Chọn Stop tại mục Service status và sau đó nhấn Start lại ngay sau đó. Chọn OK và kiểm tra lại khả năng hoạt động bình thường của máy in. Nếu lỗi “Windows cannot connect to the printer” vẫn chưa được khắc phục, bạn có thể chuyển sang cách 2 sau. Cách 2: Tạo Local Port mới
Tiếp tục click vào Add a printer. 4. Chọn Add a network, wireless or Bluetooth printer. 5. Chọn Create a new port, thay đổi cấu hình “Type of port” thành Local Port và Next. 6. Đối với Enter a port name trong hộp thoạt hiện lên, bạn cần điền vào địa chỉ của máy in. Thông số này hoạt động như sau: địa chỉ IP của bạn hoặc tên PC Tên máy in. 7. Lựa chọn nhà phát hành và mẫu máy in rồi tiếp tục làm theo hướng dẫn để hoàn thành thêm printer. Cách 3: Xóa và cài lại driver của printer để sửa lỗi “Windows cannot connect to the printer”
Click vào mục All Drivers. Tìm driver của máy in ở ô cửa sổ giữa, chuột phải và chọn Delete. Nếu bạn tìm thấy nhiều hơn một driver, lặp lại những bước trên và xóa bỏ từng cái một. Thêm vào driver của máy in một lần nữa. Địa chỉ tải về tốt nhất đó là trang web chính thức của nhà phát hành máy in mà hiện tại bạn đang sử dụng. |